Renkus-Heinz CA151-A , aktiv SA1250A amp., 135dBSPL peak

REN-CA151-RD1
Point Source høyttaler

Renkus-Heinz CA151-A , aktiv SA1250A amp., 135dBSPL peak

REN-CA151-RD1
Veil. pris: Kr 46 390,- inkl. mva
Enhet: Stk
Aktiv versjon med 15-tommers basshøyttaler + 2-tommers HF-driver med voice coil

Variant:
  • Produktbeskrivelse
  • Spesifikasjoner
  • Nedlastinger

CA151
15-tommers basshøyttaler + 2-tommers HF-driver med voice coil
Lyd som gjør forestillinger og publikum virkelig levende er ikke lett. Men C-serie høyttalere setter til kraft og får unike Renkus-Heinz-utviklinger som Complex Conic Horns til å fungere for deg. Allsidig kabinettdesign, hardware plassert overalt og robust konstruksjon hjelper deg med å løse dine lydforsterkningsutfordringer enkelt og raskt.

CA151 er aktiv og har en 15-tommers kraftig basshøyttaler og en 2-tommers titan HF-driver.

Technical Information

Sensitivity: CX151
98 dB (1W/1m)
Max SPL: CX151
129 dB Peak
CA151-A
CA151-RN
CA151-RD1
CA151-RD
128 dB Peak
Dispersion: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
60° x 40°
Freq. Response: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
± 3 dB, 55 Hz to 20 kHz
HF Driver: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
SSD1747-8, 60 W AES @ 8 ohms
LF Driver: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
SSL15-24, 350 W AES @ 8 ohms
Enclosure: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
Poplar Ply, perforated metal grille
Finish: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
Black or White Paint
Power Rating: CX151
350 W AES @ 8 Ohms
700 W Pgm @ 8 Ohms
CA151-A
CA151-RN
CA151-RD1
CA151-RD
See SA-1250 Amplifier
Connectors: CX151
Screw terminals & looping Neutrik 4-pin SpeakOn style connectors
CA151-A
CA151-RN
CA151-RD1
CA151-RD
See SA-1250 Amplifier
Hardware: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
12-point Universal Mounting Hardware
(Metric M10 threads)
M10 U-bracket attachment points
Dimensions: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
28-1/2" H x 17-1/2" W x 17" D
724 mm H x 445 mm W x 432 mm D
Weight: CX151
CA151-A
CA151-RN
CA151-RD1
CA151-RD
52 lbs / 23.6 kg, Net

SA1250 Amplifier Specifications

Audio Connections: CA151-A
2 x XLR-3, In & Loop-out, Analog
CA151-RN
2 x XLR-3, In & Loop-out, Analog and AES
CA151-RD1
2 x XLR-3, In & Loop-out, Analog and AES
2 x RJ45 Dante & Ethernet (looping)
CA151-RD
2 x XLR-3, In & Loop-out, Analog and AES
2 x RJ45 Dante Primary & Secondary Ethernet
Network Connections: CA151-RN
2 x RJ45, Looping Ethernet/RHAON
CA151-RD1
2 x RJ45 Dante/Ethernet/RHAON (Note: Dante and RHAON share a single Ethernet network.)
CA151-RD
2 x RJ45 Dante Primary & Secondary Ethernet/RHAON (Note: Dante and RHAON share a single or redundant Ethernet network.)
Maximum Input Level: CA151-A
+22 dBu, Analog
CA151-RN
CA151-RD1
CA151-RD
+22 dBu, Analog, 0 dBFS digital
User DSP: CA151-A
CA151-RN
CA151-RD1
CA151-RD
Eight fully parametric filters, high and low shelf, high and low pass filters, delay to 340 ms.
Software: CA151-RN
CA151-RD1
CA151-RD
RHAON II
Latency: CA151-A
CA151-RN
6.25 ms
CA151-RD1
CA151-RD
6.25 ms + Dante transport latency
Power Output: CA151-A
CA151-RN
CA151-RD1
CA151-RD
LF= 1000 watts, @ 8 ohms / HF = 250 watts @ 8 ohms. Multi-band peak and thermal limiting on all channels protects the drivers.
Mains Voltage: CA151-A
CA151-RN
CA151-RD1
CA151-RD
100-240 volts, 50/60 Hz auto-switching
Power Consumption: CA151-A
CA151-RN
CA151-RD1
CA151-RD
Idle: 300 mW. 1/8 power: 240 W (onset of limiting) 1/3 power: 550 W (hard limiting)
Power Connector: CA151-A
CA151-RN
CA151-RD1
CA151-RD
Neutrik powerCON TRUE-1
Temprature Limits: CA151-A
CA151-RN
CA151-RD1
CA151-RD
Max.: 140º F/60º C, with no direct sun exposure; Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C.