Klotz H3W55EX 2 x CAT, 2 x DMX and power hybrid cable drum system with etherCON, XLR 5p. and Schuko
with etherCON plug
2 double shielded CAT5e patch cables
RC5SB - 4x 2x 0.52 mm (AWG 24/1) solid bare copper, PUR jacket, Ø 6.6 mm
2 double shielded digital lines - 110 Ω (AWG 24/7)
power cable 3 x 2.5 mm²
Schuko rubber plug
A hybrid cable that combines power, data and digital audio functions in a single cable?
That’s incredible! These cables are primarily designed for audio network and DMX applications,
and minimize cabling work while allowing remote equipment to be connected quickly and easily.
This is a particular advantage where long distances are involved. As a further benefit,
the cable design eliminates interference caused by discrepancies in ground potential.
Handling is further simplified by drum storage for the cables.
The rugged PVC outer jacket encloses the finely stranded power cable with cross-section of 3 x 2.5 mm2
and the audio / data cables with dual shielding. The two CAT lines feature low signal
attenuation – a key criterion for data transmission. The two audio lines, with characteristic
impedance of 110 Ω, are suitable for AES/EBU and DMX as well as analogue audio. Both the
data and audio lines have double shielding with foil and braided copper shields to guarantee
high signal quality. Closely twisted pairs of conductors boost resistance against external
electromagnetic interference fields.
The cable drums naturally have thermal protection switches to protect from overheating.
In cable lengths of 30m and over, the cables have cable grips for strain relief.
They are available with the following connector options: XLR 3p., XLR 5p., RJ45,
etherCON, powerCON TRUE1, convertCON and earthed plugs.