Technical Specification For RM-CA2
|
Inputs
|
|
Audio Inputs |
2 x stereo analogue (1 x XLR balanced,
1 x XLR balanced or RCA phono unbal) |
Max level (0dB input
gain): |
+18dBu (analogue)/0dBFS (digital) |
CMRR: |
>60dB typical |
Analogue input impedances: |
XLR:>20kO balanced bridging
RCA:>10O unbalanced |
Input Gain: |
+10dB on unbalanced input |
Selection: |
Front panel push button with indicator LEDs |
|
|
Line Level Outputs
|
Audio Outputs: |
1 x stereo analogue |
Gain re Selected Input: |
Unity or - 10dB (switchable) |
Maximum Output Level: |
+18dB |
Output
Impedance: |
<50O |
Distortion: |
<0.02% (1kHz, +8dBu output) |
Noise: |
-95dB RMS, unity gain ref
+8dBu output |
Frequency Response: |
20Hz-20kHz +0/-0.5dB |
Crosstalk
1kHz input:
10kHz input: |
Analogue I/O, ref 0dBu
<-90dB
<-85dB |
|
|
Amplifier/Loudspeakers
|
Configuration: |
Three-way with stereo mid/
high-frequency drivers & mono
low-frequency driver |
Power Output: |
2 x 7W (HF) + 15W (LF) with
protective limiter |
Crossover: |
250Hz (24dB/octave, Linkwitz-Riley) |
Distortion (HF Outputs): |
< 0.1% (1kHz, 3W output) |
Distortion (LF Output): |
< 0.01% (100Hz, 6W output) |
Noise: |
More than 102dB below full output |
Volume: |
Mute to full volume via front
panel rotary control |
Balance Trim: |
±6dB via front panel rotary control |
Peak Acoustic
Level: |
98dB SPL @ 2ft |
|
Level & Phase Metering
|
Number: |
2 x 8-segment LED bargraphs |
Line-Up Level: |
0dB on scale can be set to 0dB or -10dB via rear panel DIP switch |
Phase Meter: |
Single LED indication showing average |
|
Connectors
|
Audio Inputs: |
4 x XLR 3-pin female balanced
2 x RCA female phono unbalanced
|
Audio Outputs: |
2 x XLR 3-pin male (balanced, may
be unbalanced) |
Headphones: |
1/4” (6.35mm) A-gauge 3-pole stereo jack socket |
Mains Input: |
Filtered 3-pin IEC male, continuously
rated 85 - 264VAC, 47 - 63Hz, fused, 60W peak, 30W average |
Fuse Rating: |
Anti-surge fuse 2A 20 x 5mm |
|
Equipment Type
|
RM-CA2: |
Confidence Monitor, 2 LED meters, 2 Analogue stereo inputs |
RM-CA2-DC: |
Confidence Monitor, 2 LED meters, 2 Analogue stereo inputs, DC supply |
|
Physical Specification
|
Dimensions (Raw): |
48cm (W) x 27cm (D) x 4.4cm (H) (1U)
19” (W) x 12” (D) x 1.73” (H) (1U) |
Dimensions (Boxed): |
57cm (W) x 52cm (D) x15cm (H)
22.4” (W) x 20.5” (D) x 5.9” (H) |
Weight: |
Nett: 4.5kg Gross: 6kg
Nett: 10lb Gross: 13.2lb |