Neutrik Xirium Pro NXP-TM-ANA-E
XIRIUM PRO Europe Transmitter TX Analog Line Input Module, power cable NKXPF-* must be ordered separately
Input and output module options handle common signal type
Whether the signal type is analog, digital (AES/EBU) or Dante, XIRIUM PRO offers modules to accept any of them.
Signal types may also be converted from one type to another, simply by selecting the appropriate module.
Need to transmit an analog signal and plug into a digital input? No problem. Select an analog input module for the transmitter,
and the AES digital output module for the receiver.
In fact, every receiver in a system can use a different output module, allowing for signal conversion to the type used by your device.
Radio frequency carrier range
IEEE 802.11a, UNII-3 band from 5725 MHz to 5825 MHz (channels 149-165), license-free
Proprietary (DiWA technology)
Conducted 8 dBm / 14 dBm (with 6 dBi antenna)
Up to 500 m point to point (LOS), longer range depending on obstacles, reflexions, interferences, XROC mode
AUDIO PERFORMANCE (ANALOG TO ANALOG PER WIRELESS LINK)
THD + Noise (TX Gain = min.)
< 0.01 % @ 1 kHz, 4 dBu / < 0.05 % @ 20 Hz – 10 kHz, 4 dBu
+0.5 dB / -1.5 dB @ 20 Hz – 20 kHz ref. 1 kHz
> 105 dB @ 1 kHz, A-weighted
< -80 dB @ 20 kHz
Number of audio channels @ 24 mbps
Number of audio channels @ 6 mbps
1 (XROC mode)
Converter resolution (ADC & DAC)