SMRT BOX 1/1 19" 488 x 138 x 80 mm
Full 19" bredde med plass til 3U
SMRT PAN panels represent a new modular concept for high quality terminating of all major signals within the audio, video, computer and telecommunication fields. Cost effective ”off the shelf” solutions for 19” panels in 1U or 3U heights.
Modularity and flexibility are offered by introduction of 1/2 19” and 1/4 19” panels. The panels may be combined both horizontally and vertically by ”splicing units”; respectively SPEX1 (1U); and SPEX3 (3U). Or the 1/2 and 1/4- and the full 19” – wide panels
may be used directly with the appropriately sized SMRT BOX.
SMRT PAN is available in a combination of cut-outs
for all industry standard connectors.
The panels are CNC milled to a high specification
from SMRT PAN aluminium extrusions. The panels
do have a unique cross section which gives rigidity
and allows for a ”slide in” attachment. A cable support
”slide in” is included with pre-milled panels.
A dedicated groove – 9 mm height – at the upper
part of the front of
the panel allows for easy positioning of
the supplied 9 mm waterproof legend strip. You will
also be able to use the Brother P-TOUCH printer
with Windows software to make high quality printed
image 9 mm laminated legend strips.
The panels are finished in black anodized aluminium.
For your convenience, all holes for the fixing of
connectors which have a specified dimension, are
threaded and the required screws are supplied.
(1U, full 19”
wide, 16 XLR
16 milled cut-outs
for XLR connectors
(Ø24) and 32
threaded fixing holes
(M3), and is supplied
with 32 pcs M3 x 6
black screws. All precision
Engineered specially for the busy user’s convenience.
The SMRT BOX system has 3 basic building blocks.
They may be used as individual boxes or assembled as
multiple-chamber boxes with good screening
between chambers for separate applications
such as audio, video,
digital, RF and 240 V outlets.
All boxes have 3U height.
The width is either a full 19”,
a 1/2 19” or a 1/4 19”. The
depth is 80 mm.
Each box is constructed of
1.5 mm steel, manufactured
by CNC punching to tightly
controlled specifications and has a
high scratch resistant finish with a powder coating in
semi gloss anthracite grey (RAL 7016).
Each box has front flanges with 2 x 6 M6 threaded
holes, to the 19” EIA standard spacing. In addition
each box has the following numbers of pre-punched
holes, for easy snap-out with a screwdriver.
PG16 pre-punch equals Ø22 mm; PG21 equals
Ø5 mm pre-punches are intended for fixing the boxes
to a wall, etc – or combining and fixing the boxes
together for multiple-chamber/cluster combinations.