> Produkter > Mikrofoner > Kondensator SHU-Beta98AMPC

Kondensator Shure Beta 98AMP/C Miniature Cardioid Mic w/Preamp & A75M

Shure Beta 98AMP/C Miniature Cardioid Mic w/Preamp & A75M

Varenummer: SHU-Beta98AMPC

Veil. pris: kr 3 595,- inkl. mva

Lagerstatus: 8 på lager
Neste forventede leveranse:
Miniatyr cardioid (nyre) kondensator mikrofon inkl mikrofonholder for montering på trommer.

The Shure Beta 98AMP is a precision-engineered miniature cardioid condenser microphone for professional sound reinforcement and studio recording. Features an integrated XLR preamplifier with a flexible gooseneck and the A75M Universal Microphone Mount for accurate placement in any configuration of toms, snares, or percussion. An extremely uniform cardioid polar pattern provides excellent gain-before-feedback, off-axis rejection of unwanted noise, and high maximum sound pressure level (SPL).

BETA 98AMP/C inkluderer en A75M Universal Microphone Mount.


  • Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control
  • Precision-engineered design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
  • Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments
  • Flexible gooseneck for precise placement and easy adjustment
  • Ships with A75M Universal Microphone mount with quick release, for versatile and secure instrument and/or stand mounting
  • Furnished with snap-fit windscreen and zipper pouch


Cartridge Type 
Electret Condenser
Polar Pattern 
Frequency Response 
20 to 20,000 Hz

Output Impedance 
150 Ω
open circuit voltage, @ 1 kHz, typical  –50.5 dBV/Pa[1] (2.5 mV)

Maximum SPL
1 kHz at 1% THD[2] 
2500 Ω load: 157.5 dB SPL
1000 Ω load: 153 dB SPL

Signal-to-Noise Ratio[3] 
63 dB 

Dynamic Range@ 1 kHz 
2500 Ω load: 126.5 dB
1000 Ω load: 122 dB
Clipping Level@ 1 kHz, 1% THD 
2500 Ω load: 12.5 dBV
1000 Ω load: 7.5 dBV
Self Noise equivalent SPL, A-weighted, typical 
31.0 dB SPL-A

Common Mode Rejection
10 to 100,000 kHz 
≥60 dB

Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Power Requirements 
11–52 V DC[4] phantom power (IEC-61938), 5.5 mA

Net Weight 
130 g (4.6 oz.)
[1] 1 Pa=94 dB SPL
[2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
[3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
[4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
Ytterligere informasjon: http://bit.ly/ot6kGa


  • linkedin
  • YouTube
  • Google+
  • Instagram