> Produkter > Mikrofoner > Dynamiske SHU-Beta52A

Dynamiske Shure Beta 52 Dynamic Kick Drum Mic

Shure Beta 52 Dynamic Kick Drum Mic

Varenummer: SHU-Beta52A

Veil. pris: kr 2 195,- inkl. mva

Lagerstatus: 0 på lager
Neste forventede leveranse:
Varianter:
Det er denne du skal ha foran basstrommen.

Beta52 er en dynamisk spesialmikrofon for basstromme og øvrige bassinstrumenter. Det laveste frekvensområdet setter store krav til mikrofonens ytelse. Frekvensresponsen i Beta52 er spesielt tilpasset en punchy gjengivelse i bassområdet. Beta52 er enkel å plassere foran basstromme og bassforsterker. Meget robust utførelse, dette gjelder også grillen. Meget effektiv innvendig shockmount. Superkardioide karakteristikk.

Features

  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability

Spesifikasjoner

Type
Dynamic (moving coil)

Frequency Response
20 to 10,000 Hz

Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis

Output Level (at 1,000 Hz)
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)

*1 Pa = 94 dB SPL

Impedance
Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z

Phasing
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Maximum SPL
174 dB at 1000 Hz (calculated)

Connector
Three-pin professional audio connector (male XLR type)

Case
Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille

Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread

Net Weight
605 grams (21.6 oz)

Ytterligere informasjon: http://bit.ly/oUx7G7

  • linkedin
  • YouTube
  • Google+
  • Instagram